LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Sunfire Automatic >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> Supplemental Inflatable Restraint System >> Repair Instructions >> Inflatable Restraint Front End Sensor Replacement >> Removal Procedure

Removal Procedure

    CAUTION: Do not strike or jolt the inflatable restraint front end sensor. Before applying power to the front end sensor make sure that it is securely fastened. Failure to observe the correct installation procedure could cause SIR deployment, personal injury, or unnecessary SIR system repairs.
  1. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 1 .
    2. Fig 1: Removing Hood Close Out Panel Push-Pin Retainers
    GM833369Courtesy of GENERAL MOTORS CORP.
  2. Remove the pushpin retainers from the hood close out panel.
  3. Remove the hood close out panel from the vehicle.
    4. Fig 2: View Of Inflatable Restraint Front End Sensor
    GM202141Courtesy of GENERAL MOTORS CORP.
  4. Remove the connector position assurance (CPA) from the wiring harness connector.
  5. Disconnect the wiring harness connector from the sensor (1).
  6. Remove the mounting bolts (2) from the sensor (1).
  7. Remove the sensor (1) from the hood latch support bracket (3).
scientia non olet · About LEMON Manuals