LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Pursuit SE, Automatic >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.2L - (Introduction) >> Repair Instructions >> Fuel Injector Replacement >> Removal Procedure

Removal Procedure

  1. Remove the fuel rail. Refer to Fuel Rail Assembly Replacement .
    2. Fig 1: Fuel Rail Assembly Component View
    GM854298Courtesy of GENERAL MOTORS CORP.
  2. Remove the fuel injector retainer clip (3).
  3. Remove the fuel injectors (5) from the fuel rail.
    4. IMPORTANT: Visually inspect the fuel injector in order to determine if the upper O-ring was also removed. If the upper O-ring is not removed, remove the O-ring from the fuel rail assembly.
  4. Remove and discard the fuel injector O-rings (4, 7).
scientia non olet · About LEMON Manuals