LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Pursuit SE, Automatic >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Battery Current Sensor
    GM1533512Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the battery current sensor electrical connector (2).
  2. Remove the battery negative cable from the vehicle. Refer to Battery Negative Cable Replacement .
  3. Remove the tape (3) securing the battery current sensor (1) to the negative battery cable (4).
    4. Fig 2: Battery Current Sensor
    GM1533515Courtesy of GENERAL MOTORS CORP.
  4. Remove the battery current sensor (2) from the ground end of the negative battery cable (1).
scientia non olet · About LEMON Manuals