LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Pursuit Base, Automatic >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Repair Instructions >> Stabilizer Shaft Replacement >> Installation Procedure

Installation Procedure

  1. Move the stabilizer bar into position from the right side of the vehicle.
    2. Fig 1: View Of Stabilizer Bar
    GM851718Courtesy of GENERAL MOTORS CORP.
  2. Install the stabilizer bushings on the stabilizer bar with the cut line facing rearward.
    3. Fig 2: View Of Stabilizer Bar Mounting Clamp
    GM851715Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the stabilizer bar clamps and bolts.

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  4. Connect the stabilizer links to the stabilizer shaft. Refer to Stabilizer Shaft Link Replacement .
  5. Install the steering gear. Refer to Power Steering Gear Replacement in Power Steering.
  6. Install the rear transaxle mount. Refer to Transmission Mount Replacement - Rear in Manual Transmission - Getrag 5 Speed, or Transmission Mount Replacement - Rear in Manual Transmission - MU3, or Transmission Mount Replacement - Rear in Automatic Transaxle - 4T40-E/4T45-E.
  7. Install the front wheels. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.
  8. Lower the vehicle.
scientia non olet · About LEMON Manuals