LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Pursuit Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Controls - 2.0L - (Introduction)) >> Repair Instructions >> Boost Control Solenoid Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating ECT Sensor, Boost Control Solenoid, & IAT Sensor
    GM1389396Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the boost control solenoid connector.
  2. Remove the boost control solenoid retaining bolt.
  3. Remove the boost control solenoid (2).
scientia non olet · About LEMON Manuals