LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Grand Prix Base >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Relay Replacement - Heated Seats - Front >> Installation Procedure

Installation Procedure

    Fig 1: Heater Relay, Push-In Retainer & Electrical Harness Connector (Front Seat)
    GM1230624Courtesy of GENERAL MOTORS CORP.
  1. Position the relay to the front seat.
  2. Connect the electrical harness connector (3) to the relay (2).
  3. Position the relay (2) on the frame and push in to attach the retainer (1)
  4. Lower the seat.
    5. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the bolts that secure the front bucket seat adjuster to the floor pan.

    Tighten:  Tighten the bolts to 42 N.m (31 lb ft).

  6. Reposition the front seat to the original position.
scientia non olet · About LEMON Manuals