Installation Procedure

Fig 1: View Of Yaw Rate Sensor/Lateral Accelerometer & Mounting Nuts

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the 2 yaw rate sensor/lateral accelerometer nuts (2).
Tighten: Tighten the yaw rate sensor/lateral accelerometer mounting nuts to 6 N.m (53 lb in).

Fig 2: View Of Yaw Rate Sensor/Lateral Accelerometer & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Connect the yaw rate sensor/lateral accelerometer electrical connector (2) to the yaw rate sensor/lateral accelerometer (1).
Install the front floor center console. Refer to Console Replacement - Front Floor in Instrument Panel, Gages, and Console.
Perform the ABS Diagnostic System Check. Refer to Diagnostic Starting Point - Antilock Brake System .