LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Grand Am SE, 2.2 F >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 2.2L - Introduction >> Repair Instructions >> Intake Air Temperature (IAT) Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Turn OFF the ignition.
    2. Fig 1: IAT Sensor & Harness Connector
    GM785336Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the intake air temperature (IAT) harness connector.
  3. Remove the IAT sensor using a twisting and pulling movement.
scientia non olet · About LEMON Manuals