LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Grand Am SC/T >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.4L - Introduction >> Repair Instructions >> Engine Coolant Temperature (ECT) Sensor Replacement >> Removal Procedure

Removal Procedure

    NOTE: Use care when handling the coolant sensor. Damage to the coolant sensor will affect the operation of the fuel control system.
  1. Turn OFF the ignition.
    2. Fig 1: View Of ECT Sensor, Connector And Wiring Harness At Fuel Rail
    GM15986Courtesy of GENERAL MOTORS CORP.
  2. Drain the coolant below the level of the engine coolant temperature (ECT) sensor. Refer to Draining and Filling Cooling System (LA1) or Draining and Filling Cooling System (L61) in Engine Cooling.
  3. Disconnect the ECT sensor electrical connector.
  4. Carefully remove the ECT sensor.
scientia non olet · About LEMON Manuals