Removal Procedure
- Turn OFF the ignition.
Courtesy of GENERAL MOTORS CORP.
- Disconnect the mass air flow (MAF) sensor electrical connector.
- Disconnect the intake air temperature (IAT) sensor electrical connector.
- Disconnect the breather tube from the air intake duct.
- Loosen the two air intake duct clamps and remove the air intake duct.
- Remove the air cleaner assembly retainer screws.
- Remove the air cleaner assembly from the vehicle.
- Separate the mass air flow (MAF) sensor from the air filter element cover.
- Remove the air cleaner element retaining screws and remove the cover.
Courtesy of GENERAL MOTORS CORP.
- Remove the air cleaner element. Inspect the air cleaner element and replace if necessary.