LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> GTO Standard >> Repair and Diagnosis >> Electrical >> Instrument Panel System Displays, Gauges And Console >> Repair Instructions >> Instrument Panel (I/P) Retainer Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of Retainer, Data Link Connector, Lugs & Screws
    GM1358199Courtesy of GENERAL MOTORS CORP.
  1. Remove the left closeout/insulator panel. Refer to Closeout/Insulator Panel Replacement - Left .
  2. Remove the knee bolster panel. Refer to Knee Bolster Replacement - Left .
  3. Remove the 2 screws (5) securing the data link connector (6) to the instrument panel lower trim retainer (1).
  4. Remove the screw (4) attaching the retainer (1) to the air duct.
  5. Remove the 3 screws (3) attaching the retainer (1) to the instrument panel assembly.
  6. Swing the lower part of the retainer (1) downward and disengage the two lugs (2) from the instrument panel assembly.
  7. Remove the retainer (1) from the instrument panel.
scientia non olet · About LEMON Manuals