Scan Tool Data List
Body Control Module
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| Battery power is the only requirement for Module Information, Inputs and Lock Outputs. Key ON is required for window outputs. | |||
| Ignition Voltage | Data | 9.0-15.0 Volts | 12.8 Volts |
| Ignition Status | Data | On/Off | Varies |
| Ignition Accessory | Data | On/Off | Varies |
| Accessory Relay Command | Data | On/Off | Varies |
| Passenger Door Status | Data | Open/Close | Varies |
| Passenger Door Unlock Input | Data | Active/Inactive | Varies |
| Passenger Door Unlock Relay | Data | On/Off | Off |
| Passenger Window UP Switch | Data | Active/Inactive | Inactive |
| Passenger Window Down Switch | Data | Active/Inactive | Inactive |
| Passenger Window Down Relay | Data | On/Off | Off after relay timeout |
| Driver Door Status | Data | Open/Close | Varies |
| Driver Door Unlock | Data | Active/Inactive | Varies |
| Driver Door Unlock Relay | Data | On/Off | Off |
| Driver Window Up Switch | Data | Active/Inactive | Inactive |
| Driver Window Down Switch | Data | Active/Inactive | Inactive |
| Driver Window Down Relay | Data | On/Off | Off after relay timeout |