LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> GTO Standard >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Body Control Module (BCM) Programming/RPO Configuration >> Linking the PIM to the BCM

Linking the PIM to the BCM

IMPORTANT: If a new Powertrain Interface Module has been installed in the Vehicle, it must be security linked to the Body Control Module and the Engine Control Module. It is recommended that you link the PIM to the BCM before linking to the ECM. For information on linking the PIM to the ECM refer to Engine Control Module Programming and Setup .

Connect the Tech 2 to the data link connector (DLC) and select: Diagnostic/Pontiac GTO/Body/Powertrain Interface Module/Special Functions/Link BCM to PIM, and follow the screen instructions.

scientia non olet · About LEMON Manuals