LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> GTO Automatic >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Repair Instructions >> Seat Belt Replacement - Front >> Installation Procedure

Installation Procedure

    Fig 1: View Of Front Seat Belt Retractor
    GM1353826Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the front seat belt retractor (2) to the vehicle. Secure the retractor with the bolt (3).

    Tighten:  Tighten the front seat belt retractor mounting bolt to 42.5 N.m (31 lb ft).

    2. Fig 2: View Of Intermediate Seat Belt Guide
    GM1353822Courtesy of GENERAL MOTORS CORP.
  2. Install the intermediate seat belt guide (1) to the vehicle. Secure the guide with the screws (2).

    Tighten:  Tighten the intermediate seat belt guide screws to 2.1 N.m (18.5 lb in).

    3. Fig 3: View Of Front Seat Belt Upper Guide
    GM1353804Courtesy of GENERAL MOTORS CORP.
  3. Install the front seat belt upper guide (2) to the vehicle. Secure the guide with the bolt (3).

    Tighten:  Tighten the front seat belt upper guide bolt to 42.5 N.m (31 lb ft).

  4. Install the center pillar upper trim panel. Refer to Trim Panel Replacement - Upper Center Pillar in Interior Trim.
  5. Install the quarter panel trim panel. Refer to Trim Panel Replacement - Rear Quarter in Interior Trim.
  6. Install the door sill trim plate. Refer to Door Sill Plate Replacement in Interior Trim.
  7. Install the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
    8. Fig 4: View Of Front Seat Belt Lower Anchor Bolt, Trim Cover & Seat Belt Spacer
    GM1353802Courtesy of GENERAL MOTORS CORP.
  8. Install the front seat belt lower anchor bolt (2) and seat belt spacer (4).

    Tighten:  Tighten the front seat belt lower anchor bolt to 42.5 N.m (31 lb ft).

  9. Install the front seat belt lower anchor bolt trim cover (3).
scientia non olet · About LEMON Manuals