LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> GTO Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 88 (Seat System) >> Repair Instructions >> Seat Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place a protective cover over the sill plate and door trim panel.
  2. Tilt the steering wheel full up position.
  3. Disable the SIR system. Refer to SIR Disabling and Enabling Zone 7 or to SIR Disabling and Enabling Zone 9 in SIR.
    4. Fig 1: View Of Seat & Components
    GM1247931Courtesy of GENERAL MOTORS CORP.
  4. Position the seat rearward.
  5. Remove the push pins and covers from the front of the adjuster legs.
  6. Remove the nuts from the front of the adjuster legs.
  7. Position the seat forward.
  8. Remove the nuts attaching the rear adjuster legs.
  9. Disconnect the seat electrical connectors, if equipped with a power seat.
  10. Remove the seatbelt retaining nut and the seatbelt from the anchor stud.
  11. With the add of an assistant, remove the seat from the vehicle.
scientia non olet · About LEMON Manuals