Installation Procedure
- Position the rear muffler assembly to the vehicle.
- Install the rear muffler assembly to the support hangers (2).
- Install the front muffler to rear muffler flange nuts (1).
Tighten: Tighten the front muffler to rear muffler flange bolts to 25 N.m (18 lb ft).
- Lower the vehicle.CAUTION: Refer to Exhaust Service Caution in Cautions and Notices.CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
Connect the negative battery cable.
NOTE:
Refer to Fastener Notice
in Cautions and Notices.