LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> G6 Base >> Repair and Diagnosis >> Suspension >> Wheel Alignment System >> Repair Instructions >> Rear Camber Adjustment

Rear Camber Adjustment

    Fig 1: Loosening Inner Lower Control Arm Cam Bolt Nuts
    GM1237902Courtesy of GENERAL MOTORS CORP.
  1. Loosen the inner lower control arm cam bolt nuts.
  2. Rotate the cam bolts to the required camber specification setting. Refer to Measuring Wheel Alignment .
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Maintain the camber setting while tightening the cam bolt nuts.

    Tighten:  Tighten the inner lower control arm (front) bolt nut to 110 N.m (81 lb ft).

    4. IMPORTANT: Check the toe setting AFTER changing camber or caster.
  4. Check the camber setting after tightening.
  5. Adjust the camber setting if necessary.
scientia non olet · About LEMON Manuals