Installation Procedure

NOTE: Refer to Fastener Notice in Cautions and Notices.

Fig 1: Removing Lower Trim Cover Screws From Lower Trim Cover

Courtesy of GENERAL MOTORS CORP.

Install the lower trim cover (3) onto the steering column. Install the lower trim cover screws (2) into the lower trim cover (3).
Tighten: Tighten the lower trim cover screws (2) to 1.5 N.m (13 lb in).

Fig 2: Releasing Lock Rings From Instrument Panel Seal

Courtesy of GENERAL MOTORS CORP.

Install the upper trim cover (1) and install the instrument panel seal retaining nuts (2).
Install the upper trim cover (2) onto the steering column. Install the instrument panel seal retaining nuts (1) onto the upper trim cover (2).
Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.