Test Description
The number below refers to the step number on the diagnostic table.
- 2: This step tests if the voltage malfunction exists in the power steering system.
DTC C0899
| Step | Action | Values | Yes | No |
|---|---|---|---|---|
| Schematic Reference: Power Steering System Schematics Connector End Views Reference: Power Steering System Connector End Views |
||||
| 1 | Did you perform the Diagnostic System Check - Vehicle? | - | Go to Step 2 | Go to Diagnostic System Check - Vehicle |
| 2 |
|
9 V | Go to Testing for Intermittent Conditions and Poor Connections | Go to Step 3 |
| 3 | Inspect for poor connections at the underhood fuse block stud ring terminal. Refer to Testing for Intermittent Conditions and Poor Connections
and Connector Repairs
. Did you find and correct the condition? |
- | Go to Step 10 | Go to Step 4 |
| 4 | Inspect for poor connections at the ground terminal G103. Refer to Testing for Intermittent Conditions and Poor Connections
and Connector Repairs
. Did you find and correct the condition? |
- | Go to Step 10 | Go to Step 5 |
| 5 | Inspect for poor connections at the 80-amp EPS fuse in the underhood fuse block. Refer to Testing for Intermittent Conditions and Poor Connections
and Connector Repairs
. Did you find and correct the condition? |
- | Go to Step 10 | Go to Step 6 |
| 6 | Inspect for poor connections at the power steering control module (PSCM) harness connector. Refer to Testing for Intermittent Conditions and Poor Connections
and to Connector Repairs
. Did you find and correct the condition? |
- | Go to Step 10 | Go to Step 7 |
| 7 | Test the battery positive voltage circuit of the PSCM for a high resistance. Refer to Circuit Testing
and Wiring Repairs
. Did you find and correct the condition? |
- | Go to Step 10 | Go to Step 8 |
| 8 | Test the ground circuit of the PSCM for a high resistance. Refer to Circuit Testing
and Wiring Repairs
. Did you find and correct the condition? |
- | Go to Step 10 | Go to Step 9 |
| 9 | Replace the power steering motor and module assembly. Refer to Motor Replacement - Power Steering Assist (EPS) . Did you complete the replacement? |
- | Go to Step 10 | - |
| 10 |
|
- | Go to Step 2 | System OK |