LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> G6 Base >> Repair and Diagnosis >> General Information >> OEM General Information >> Cautions And Notices >> Introduction >> Work Stall Test Caution

Work Stall Test Caution

CAUTION: One or more of the following guidelines may apply when performing specific required tests in the work stall:
  • When a test requires spinning the drive wheels with the vehicle jacked up, adhere to the following precautions:
    • Do not exceed 56 km/h (35 mph) when spinning one drive wheel with the other drive wheel stopped. This limit is necessary because the speedometer indicates only one-half the actual vehicle speed under these conditions. Personal injury may result from excessive wheel spinning.
    • If all of the drive wheels are spinning at the same speed, do not exceed 112 km/h (70 mph). Personal injury may result from excessive wheel spinning.
  • When a test requires jacking up the vehicle and running with the wheels and brake rotors removed, adhere to the following precautions:
    • Do not apply the brake with the brake rotors removed.
    • Do not place the drive motor in PARK with the drive wheels still spinning.
    • Turn the key OFF in order to stop the wheels from spinning.