Component Testing
WARNING: This page is about a different car, the 2008 Buick Lucerne. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition OFF, disconnect the VES actuator harness connector.
- Measure for 1.9-10 ohms of resistance between the VES actuator terminals A and B.
- If not 1.9-10 ohms of resistance, replace the VES actuator.
- Measure for infinite ohms of resistance between each VES actuator terminal and the VES actuator housing/case.
- If less than the specified range, replace the VES actuator.