LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> G6 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 467 (HVAC System - Automatic) >> Repair Instructions >> Recirculation Actuator Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuse labeled HVAC CTRL (BATT).
  2. Remove the right closeout panel. Refer to Instrument Panel Insulator Panel Replacement - Right Side .
  3. Remove the communication interface module. Refer to Communication Interface Module Replacement .
  4. Remove the OnStar module bracket. Refer to Bracket Assembly Replacement - OnStar Module .
    5. Fig 1: Locating Closeout Panel
    GM1230581Courtesy of GENERAL MOTORS CORP.
  5. Remove the recirculation door actuator screws.
    6. Fig 2: Identifying Recirculation Actuator & Screws
    GM1203574Courtesy of GENERAL MOTORS CORP.
  6. Remove the recirculation door actuator.
  7. Remove the recirculation door actuator wire harness connector.
scientia non olet · About LEMON Manuals