LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> G6 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 432 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Negative Cable Replacement (LZ9) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Engine Wiring Harness Ground Bolt, Terminal & Battery Cable Ground Terminal
    GM1583641Courtesy of GENERAL MOTORS CORP.
  1. Install the negative battery cable.
  2. Install the negative battery cable terminal (1) to the transaxle stud.
  3. Install the engine wiring harness terminal (2) to the transaxle stud.
    4. NOTE: Refer to Fastener Notice .
  4. Install the engine wiring harness nut (3).

    Tighten:  Tighten the nut to 25 N.m (18 lb ft).

    5. Fig 2: Identifying Battery Cable Components
    GM1783030Courtesy of GENERAL MOTORS CORP.
  5. Install the negative battery cable clip (4) to the battery tray.
  6. Install the negative battery cable ground terminal (2) to the tie bar stud.
  7. Install the negative battery cable ground terminal nut (1) to the tie bar.

    Tighten:  Tighten the nut to 10 N.m (89 lb in).

  8. Install tape in order to secure the negative battery cable to the positive battery cable.
  9. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
scientia non olet · About LEMON Manuals