LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> G6 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.5L (Lx9) - Introduction >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Removing MAP Sensor And MAP Sensor Seal From Upper Intake Manifold
    GM1239001Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the manifold absolute pressure (MAP) sensor electrical connector.
  2. Remove the MAP sensor attaching screw.
  3. Remove the MAP sensor and MAP sensor seal from the upper intake manifold.
scientia non olet · About LEMON Manuals