LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> G6 Base >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.5L (Lx9) - Introduction >> Repair Instructions >> Engine Coolant Temperature (ECT) Sensor Replacement >> Removal Procedure

Removal Procedure

NOTE: Use care when handling the coolant sensor. Damage to the coolant sensor will affect the operation of the fuel control system.
    Fig 1: Installing ECT Sensor
    GM1275978Courtesy of GENERAL MOTORS CORP.
  1. Partially drain the cooling system. Refer to Draining and Filling Cooling System in Engine Cooling.
  2. Disconnect the engine coolant temperature (ECT) sensor electrical connector.
  3. Remove the ECT sensor.
scientia non olet · About LEMON Manuals