Connect Procedure

Fig 1: View Of Battery Negative Cable At Battery

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

IMPORTANT: Clean any existing oxidation from the contact face of the battery terminal and battery cable using a wire brush before installing the battery cable to the battery terminal.

Connect the negative battery cable to the battery.
Tighten: Tighten the bolt to 17 N.m (13 lb ft).

Fig 2: View Of Battery Cover

Courtesy of GENERAL MOTORS CORP.

Install the battery cover.
1. Install the locking tab next to the strut tower first.
2. Install the locking tab next to the engine second.
3. Install the locking tab next to the powertrain control module (PCM) last.
Reset the radio stations and the clock.