LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> G6 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Repair Instructions >> Wiper Drive System Module Replacement >> Removal Procedure

Removal Procedure

IMPORTANT: The new wiper drive system module does not include the wiper motor nor the motor support bracket. You must install the old components to the new wiper system module.
    Fig 1: View Of Wiper Drive System Module
    GM1471736Courtesy of GENERAL MOTORS CORP.
  1. Remove the wiper arms. Refer to Wiper Arm Replacement (Legacy) .
  2. Remove the air inlet grille panel. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  3. Remove the bolts attaching the wiper module to the plenum.
  4. Carefully lift the wiper module out of the plenum.
  5. Disconnect the electrical connector from the wiper motor.
  6. Disconnect the clip retaining the electrical harness to the wiper module.
  7. Remove the wiper module assembly from the vehicle.
    8. Fig 2: View Of Wiper Motor
    GM1471742Courtesy of GENERAL MOTORS CORP.
  8. Remove the wiper motor. Refer to Wiper Motor Replacement (Legacy) .
scientia non olet · About LEMON Manuals