LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> G6 Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Entertainment Systems >> Cellular Communication System >> Repair Instructions >> Communication Interface Module Replacement >> Removal Procedure

Removal Procedure

IMPORTANT: The communication interface module has a specific set of unique numbers that tie the module to each vehicle. These numbers, the 10-digit station identification and the 11-digit electronic serial number, are used by the National Cellular Network and OnStar to identify the specific vehicle. Because these numbers are tied to the vehicle identification number of the vehicle, you must never exchange these parts with those of another vehicle.
  1. Remove the right closeout panel. Refer to Closeout/Insulator Panel Replacement - Right in Instrument Panel, Gages and Console.
  2. Disconnect the communication interface module wire harness and antenna connectors.
    3. Fig 1: Disconnecting Cable From Communications Module
    GM1230581Courtesy of GENERAL MOTORS CORP.
  3. Remove the communication interface module bolts.
    4. Fig 2: Removing Communication Interface Module
    GM1207697Courtesy of GENERAL MOTORS CORP.
  4. Remove the communication interface module.
scientia non olet · About LEMON Manuals