LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Bonneville SLE >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 3.8L - Introduction >> Repair Instructions >> Manifold Absolute Pressure (MAP) Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Turn OFF the ignition.
  2. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement .
  3. Disconnect the MAP sensor electrical connector.
    4. Fig 1: Removing/Installing Manifold Absolute Pressure (MAP) Sensor (VIN K)
    GM12346Courtesy of GENERAL MOTORS CORP.
  4. Carefully bend the locking tabs holding the MAP (1) sensor to the PCV valve cover (2) just enough to remove the MAP sensor.
  5. Pull the MAP sensor straight out of PCV valve cover.
scientia non olet · About LEMON Manuals