Installation Procedure

Fig 1: Removing/Installation Intake Air Duct

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the intake duct on the throttle body.
Rotate the intake duct down and install the intake air duct onto the air cleaner.
Tighten: Tighten the intake duct clamp to 2 N.m (18 lb in).

Fig 2: View Of Intake Air Temperature Sensor & Electrical Sensors

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector (2) to the intake air temperature (IAT) sensor (1).