LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Bonneville SLE >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Computer/Integrating Systems >> Repair Instructions >> Rear Integration Module Replacement >> Removal Procedure

Removal Procedure

  1. Before replacing the rear integration module (RIM), record the personalization settings to transfer to the new module, if available. Refer to Body Control Module (BCM) Programming/RPO Configuration (IPM)  or Body Control Module (BCM) Programming/RPO Configuration (DIM)  or Body Control Module (BCM) Programming/RPO Configuration (RIM) .
  2. Remove the rear seat cushion. Refer to Seat Cushion Replacement - Rear in Seats.
  3. Remove the rear seat belt buckle anchor bolts.
  4. Remove the rear seat back. Refer to Seat Back Replacement - Rear in Seats.
  5. Move the rear seat back insulator to the side.
    6. Fig 1: View Of Push Pin Retainers, Rear Integration Module & Electrical Connectors
    GM492570Courtesy of GENERAL MOTORS CORP.
  6. Remove the push pin retainers (1).
  7. Disconnect the electrical connectors (3).
  8. Remove the RIM (2) from the vehicle.
scientia non olet · About LEMON Manuals