Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Install the BPMV bracket (4) to the wheel house.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the 3 BPMV bracket nuts (1) (2) and (3) to the studs on the BPMV bracket (4).
Tighten: Tighten the 3 BPMV bracket nuts to 10 N.m (7 lb ft).

Fig 1: View Of BPMV Bracket Nuts

Courtesy of GENERAL MOTORS CORP.

Install the BPMV and EBCM as an assembly to the BPMV bracket. Refer to Brake Pressure Modulator Valve (BPMV) Replacement .
Turn the ignition switch to the RUN position.
Perform the Diagnostic System Check - ABS .