Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.

Position the center speaker to the I/P. Connect the electrical connector.

Fig 1: View Of Center Speaker & Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Lower the speaker into the opening.

Fig 2: View Of Center Speaker

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the center speaker screws.
Tighten: Tighten the screws to 2 N.m (18 lb in).
Align the speaker grille to the I/P. Make sure the logo is facing the driver.

Fig 3: View Of Center Speaker Grille

Courtesy of GENERAL MOTORS CORP.

Press the speaker grille into the I/P.