LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Power Steering System) >> Repair Instructions >> Power Steering Cooler Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the power steering cooler to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts to the power steering cooler.

    Tighten:  Tighten the retaining bolts to 14 N.m (124 lb in).

  3. Install the power steering cooler hoses.
  4. Bleed the power steering system. Refer to Bleeding the Power Steering System .
    5. Fig 1: Power Steering Cooler
    GM682324Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals