LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 34 (Bumper System) >> Repair Instructions >> Fascia Support Bracket Replacement - Front Upper >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the hood.
  2. Remove the upper radiator air baffle. Refer to Radiator Air Baffle and Deflector Replacement - Upper in Engine Cooling.
  3. Remove the bolts from the center support bracket at the front bumper fascia.
  4. Remove the center support bracket from the hood latch center support.
    5. Fig 1: Fascia Support Bracket
    GM457296Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals