LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Seat System) >> Repair Instructions >> Seat Back Recliner Replacement - Front >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front seat from the vehicle. Refer to the following procedures:
  2. Pull back the front seat back cover. Refer to Seat Back Cover Replacement - Front .
  3. Pull back the front seat cushion cover in order to expose the front seat recliner assembly. Refer to Seat Cushion Cover Replacement - Front (Bucket Seat)  or Seat Cushion Cover Replacement - Front (Split Bench) .
  4. Remove the roll pins from the front seat recliner assembly.
  5. Fig 1: Roll Pins & Hinge
    GM523811Courtesy of GENERAL MOTORS CORP.
  6. Remove the front seat recliner assembly from the front seat cushion frame.
  7. Fig 2: Removing Front Seat Recliner Assembly
    GM526597Courtesy of GENERAL MOTORS CORP.