Fastener Tightening Specifications
WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application |
Specification | |
|---|---|---|
| Metric | English | |
| Intermediate Shaft Seal Bolts | 3 N.m | 27 lb in |
| Intermediate Shaft to the Steering Column Pinch Bolt | 48 N.m | 35 lb ft |
| Intermediate Shaft to the Steering Gear Pinch Bolt | 48 N.m | 35 lb ft |
| Linear Shift Assembly Screws | 3.5 N.m | 31 lb in |
| Shift Lever Screw | 1.5 N.m | 13 lb in |
| Steering Column Mounting Bolts (Tighten in Sequence) | 24 N.m | 18 lb ft |
| Steering Column Support Assembly Torx® Head Screws | 17 N.m | 13 lb ft |
| Steering Column Trim Cover Screws Lower | 2 N.m | 18 lb in |
| Steering Column Trim Cover Screws Lower | 3.5 N.m | 31 lb in |
| Steering Column Trim Cover Screws Upper | 1.5 N.m | 13 lb in |
| Steering Wheel Nut | 45 N.m | 33 lb ft |
| Steering Wheel Shroud Screws | 2 N.m | 18 lb in |
| Turn Signal Multifunction Switch Screws Side | 7 N.m | 62 lb in |
| Turn Signal Multifunction Switch Screws Top | 3 N.m | 30 lb in |