Removal Procedure
WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
The sunshades can be equipped with an illuminated vanity mirror. The illuminated vanity mirror is not serviced as a separate unit.
- Position the sunshade so the bottom edge is pointing straight down.
- Remove the sunshade from the sunshade anchor and position the sunshade between the sunshade anchor and the windshield.
- Remove the screws from the sunshade.
- Once the retainer shaft releases the sunshade will begin to separate from the bezel. Some back-and-forth movement may be necessary to release sunshade from the retainer.
- Disconnect the electrical connector from the sunshade if equipped.
- Remove the sunshade from the vehicle.