LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Aztek Base, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 108 (Wiper System And Washer System) >> Repair Instructions >> Washer Solvent Container Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise the hood.
  2. Drain the washer solvent from the washer solvent container.
  3. Remove the upper washer solvent container screw.
    4. Fig 1: Upper Washer Solvent Container Screw
    GM1257439Courtesy of GENERAL MOTORS CORP.
  4. Remove the right front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  5. Disconnect the washer pump hose.
    6. Fig 2: Identifying Washer Pump Hose, Washer Pump Electrical Connector, & Washer Solvent Level Sensor
    GM815208Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the washer pump electrical connector.
  7. Disconnect the washer solvent level sensor electrical connector.
  8. Remove the washer pump from the container.
  9. Remove the level sensor from the container.
  10. Remove the lower washer solvent container screws.
    11. Fig 3: Lower Washer Solvent Container Screws
    GM1257439Courtesy of GENERAL MOTORS CORP.
  11. Remove the washer solvent container from the right frame rail.
scientia non olet · About LEMON Manuals