Removal Procedure
- Remove the front door trim panel. Refer to Trim Panel Replacement - Side Front Door (Aztek) or Trim Panel Replacement - Side Front Door (Rendezvous) .
- Remove the water deflector. Refer to Water Deflector Replacement - Front Door .
- Remove the outside rearview mirror. Refer to Mirror Replacement - Power .
- Remove the outer belt sealing strip. Refer to Sealing Strip Replacement - Front Door Window Belt Outer .
- Remove the inner belt sealing strip. Refer to Sealing Strip Replacement - Front Door Window Belt Inner .
- Remove the window. Refer to Window Replacement - Front Door .
- Remove the frame applique. Refer to Door Frame Applique Replacement - Front .
- Remove the window regulator. Refer to Window Regulator Replacement - Front Door .
- Remove the outside door handle. Refer to Door Handle Replacement - Front Outside .
- Remove the inside handle. Refer to Door Handle Replacement - Front Inside .
- Remove the lock. Refer to Lock Replacement - Front Door .
- Remove the window weatherstrip. Refer to Weatherstrip Replacement - Front Door Window .
- Remove the rubber conduit. Refer to Rubber Conduit Replacement - Front Door .
- Remove the wiring harness. Refer to Wiring Harness Replacement - Front Door .
- Remove the body side moldings. Refer to Molding Replacement - Front Door Body Side (Aztek) or Molding Replacement - Front Door Body Side (Rendezvous) in Exterior Trim.
- Support the front door.
- Remove the bolt from the upper hinge keeper strap.IMPORTANT: Do not dislodge the washer on the lower hinge.
- Remove the bolts from the front lower door hinge side.
- With an assistant, lift off the front door from the upper hinge.
- Remove the side hinge. Refer to Hinge Replacement - Front Door .