LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle - Introduction & Repair Instructions >> Repair Instructions >> Transmission Fluid Cooler Connector Replacement >> Removal Procedure

Removal Procedure

NOTE: Allow sufficient clearance around the transaxle oil cooler pipes and around the hoses to prevent damage or wear which may cause fluid loss.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Position the drain pan.
  3. Remove the transaxle oil cooler hoses from the transaxle oil cooler fittings. Refer to Transmission Fluid Cooler Line Quick Connect Fitting .
    4. Fig 1: View Of Transaxle Oil Cooler Fittings
    GM190633Courtesy of GENERAL MOTORS CORP.
  4. Remove the transaxle oil cooler fittings (28, 29) from the transaxle.
scientia non olet · About LEMON Manuals