LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Stationary Window System) >> Repair Instructions >> Ambient Air Temperature Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Ambient Air Temperature Sensor
    GM1228352Courtesy of GENERAL MOTORS CORP.
  1. Position the sensor to the vehicle.
  2. Connect the electrical connector to the sensor.
  3. Install the outside air temperature sensor to the radiator air baffle.
  4. Position the hood latch closeout panel to the vehicle.
    5. Fig 2: View Of Hood Latch Closeout Panel
    GM1228692Courtesy of GENERAL MOTORS CORP.
  5. Install the push-in retainers (1) to the hood latch closeout panel.
    6. Fig 3: Push-In Retainers & Hood Latch Closeout Panel
    GM1228690Courtesy of GENERAL MOTORS CORP.
  6. Close the hood.
  7. Drive the vehicle at a speed of 32 km/h (20 mph) for approximately one and a half minutes or at a speed of 72 km/h (45 mph) for approximately one minute in order to obtain the outside air update.
scientia non olet · About LEMON Manuals