LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Engine Exhaust System) >> Repair Instructions >> Converter Hanger Assembly Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the 3-way catalytic converter pipe hangers.
  2. Fig 1: View Of Catalytic Converter Hangers
    GM289493Courtesy of GENERAL MOTORS CORP.
  3. Remove the support from the exhaust system and the vehicle.
  4. Inspect the exhaust system for underbody contact.
  5. Lower the vehicle.