LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 24 (Seat System) >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector to the power front seat switch.
    2. Fig 1: Power Front Seat Switch Electrical Connector
    GM527143Courtesy of GENERAL MOTORS CORP.
  2. Install the power front seat switch to the front seat outer trim panel, pressing into place until fully seated.
    3. Fig 2: Installing Power Front Seat Switch
    GM527144Courtesy of GENERAL MOTORS CORP.
  3. Install the front seat cushion outer trim panel. Refer to Trim Panel Replacement - Front Seat .
scientia non olet · About LEMON Manuals