LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Engine Control System 3.8L (Introduction)) >> Repair Instructions >> Exhaust Gas Recirculation (EGR) Outlet Pipe Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Chevrolet Monte Carlo and 2004 Chevrolet Impala. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
  2. Remove the exhaust gas recirculation (EGR) outlet pipe bolt (3) from the intake manifold.
  3. Remove the EGR outlet pipe nut (2) from the EGR valve inlet adapter pipe.
  4. Remove the EGR valve outlet pipe (1).
    5. Fig 1: Removing EGR Valve Outlet Pipe
    GM703592Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals