LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine Controls - 3.6L - Introduction) >> Repair Instructions >> Intake Manifold Runner Control Solenoid Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Intake Manifold Runner Control Solenoid
    GM1395967Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: DO NOT disconnect the power steering hoses or drain the power steering fluid.
  1. Remove and reposition the power steering fluid reservoir to gain access. Refer to Remote Power Steering Fluid Reservoir Replacement (LY7) in Power Steering System.
  2. Disconnect the electrical connector to the control module for the intake manifold runner.
  3. Remove the intake manifold runner control solenoid bolts.
  4. Remove the intake manifold runner control solenoid.
scientia non olet · About LEMON Manuals