LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 140 (Engine Controls - 3.6L - Introduction) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Buick Rendezvous. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
    2. Fig 1: Identifying Electrical Connector From The Fuel Tank Vapor Pressure Sensor
    GM1404551Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector from the fuel tank vapor pressure sensor.
    3. Fig 2: View Of Fuel Tank Pressure Sensor
    GM1404558Courtesy of GENERAL MOTORS CORP.
  3. Remove the fuel tank pressure sensor from the fuel sender.
scientia non olet · About LEMON Manuals