LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 124 (Disc Brake System) >> Repair Instructions >> Disc Brake Backing Plate Replacement - Rear >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Grand Prix. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel bearing/hub (3). Refer to Wheel Bearing/Hub Replacement - Rear in Rear Suspension
    2. IMPORTANT: The backing plate (2) is attached to the knuckle (1) through the wheel bearing hub bolts (4).
  2. Remove the backing plate (2) from the knuckle (1).
    3. Fig 1: Identifying Backing Plate & Wheel Bearing/Hub
    GM1228560Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals