LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Repair Instructions >> Cruise Release Switch Replacement >> Removal Procedure

Removal Procedure

  1. Remove the left side instrument panel insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
    2. Fig 1: Aligning Cruise Release Switch Until Travel Stop Is Reached
    GM882916Courtesy of GENERAL MOTORS CORP.
  2. Rotate the cruise control release switch counterclockwise until the travel stop has been reached (approximately 60 degrees).
    3. Fig 2: Identifying Cruise Control Release Switch
    GM882912Courtesy of GENERAL MOTORS CORP.

  3. Remove the cruise control release switch from the retainer.

  4. Disconnect the cruise control release switch electrical connector.
scientia non olet · About LEMON Manuals