LEMON Manuals: Even more car manuals for everyone
Home >> Pontiac >> 2005 >> Aztek Base, AWD >> Repair and Diagnosis (Single Page) >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Wheel & Steering Column >> Repair Instructions >> Steering Wheel Control Switch Assembly Replacement >> Removal Procedure

Removal Procedure

    CAUTION: Refer to SIR Caution in Cautions and Notices.
  1. Disable the SIR System. Refer to SIR Disabling and Enabling Zone 3 in SIR.
    2. Fig 1: Identifying Steering Wheel Rear Bezel Retaining Screws
    GM691015Courtesy of GENERAL MOTORS CORP.
  2. Remove the steering wheel. Refer to Steering Wheel Replacement .
  3. Remove the retaining screws (2, 3) from the steering wheel rear bezel.
  4. Remove the steering wheel rear bezel (1).
    5. Fig 2: View Of Inner Steering Wheel Connector
    GM691024Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the electrical connector.
  6. Insert a small, blunt-ended tool into the access hole in the back of the steering wheel. Push the switch out of the steering wheel.
scientia non olet · About LEMON Manuals